If there's a matting
solution - Mats and Frames Ltd will provide it. We have a
comprehensive range of mats and matting - all available to bespoke
requirements. If you have any questions about the suitability of one
of our floor matting products for a particular application - or need
more information of any kind - please don't hesitate to get in
touch. A member of the Mats and Frames Ltd team will always be happy
to assist you with additional details or expert advice. Our helpful
staff have a thorough understanding of the complete customized logo
mat and general floor matting production process - from research and
development to graphic design and final manufacturing.We understand
that the most frustrating aspect of buying customized mats and floor
matting is often the long lead times that are commonplace in the
industry and we have established a uniquely efficient infrastructure
that enables us to offer our customers the fastest possible
completion and delivery turnaround. The majority of our matting is
available on a next day delivery basis.
Remove the
dirt from the
matwell using a
brush or a
vacuum cleaner
after having
rolled up the
mat.
Remove the
dry dirt
remaining on the
mat by vacuuming
in the direction
of the profiles
(not
perpendicular to
the direction of
the profiles).
Periodic maintenance
Roll up the
mat and remove
the dirt
accumulated
under the mat
with a vacuum
cleaner or with
a dustpan and
brush.
Coarse,
sticky or wet
dirt remaining
on the mat is
removed unsing a
hard scrubbing
brush in
combination with
water and a
universal
detergent.
Thorough maintenance
The mat is
removed from the
matwell for
thorough
cleaning.
Vacuum the
matwell and
clean with
water.
Clean the
mat with a
high-pressure
cleaner or with
a hard scrubbing
brush, in
combination with
water and a
universal
detergent.
MAINTENANCE PRODUCTS
Does not
react to
Alcohol, aldehydes, alkalis,
ethers, ketones, soaps and
synthetic detergents, (sea)water,
solvents used for dry cleaning.
Resistant to
Alkalis.
Reacts
to
HCI, H2SO4,
oxalic acid and bleaching agents
(i.e. not resistant to bleaching
agent containing 12.5% active
chloride (as usually available on
the market)
Remove
the dirt accumulated
under the mat with a
vacuum cleaner or with a
dustpan and brush.
Clean
the mat with a a garden
hose or a hard scrubbing
brush in combination
with water and a
universal detergent.
SPECIFICATIONS
Description:
Rollable scraping
mat consisting of
durable nylon
brushes, securely
imbedded in PVC
profiles. The PVC
profiles are
separated by means
of PVC spacing caps.
Profiles and caps
are held in place by
steel wires running
at right angles
through the
profiles. The
extremities of these
flexible steel wires
are clamped in a
hollow aluminium
profile.
Depending on the
expected quantities
of dirt and the
intensity of traffic
a 4 mm or
8 mm open
version is
available, with
single or double PVC
profiles, with a
double row of
brushes.
An aluminium
scraping profile can
be integrated for
heavy duty
applications.
Applications:
The mats are suitable
for indoor and outdoor
use and are highly
recommended for heavy
traffic entrance areas
(more than 100 persons
per hour).
Brushes:
The brushes have a
height of 8 mm and are
available in different
colours. The density of
the UV-stabilised
brushes (nylon 6.6) is
approximately 950,000
rigid nylon bristles per
m'. Each brush consists
of approximately 110
bristles.
Profiles:
The PVC profiles are 15
mm high and 15 mm wide.
These rigid PVC profiles
are available in the
colours grey and
anthracite. An aluminium
end profile is fixed at
the extremities of the
mat.
Steel wire:
2 mm stainless steel
wires (type 316) keep
the profiles and spacing
caps in place.
Spacing caps:
The round spacing caps
are made of soft
anthracite-coloured PVC
and have a diameter of
10 mm. They are
available in lengths of
4 mm or 8 mm.
Dimensions and
finish:
The total mat height is
23 mm. The mat is made
to size in the factory.
Practically all shapes
are possible. Available
in an open construction
(4 mm or 8 mm) with a
single or double row of
profiles, with or
without scraping
profile. Possibility to
incorporate a logo,
drawing or text.
Installation:
The mats can be placed
in a matwell with a
depth of 25 mm or
directly on the floor;
in that case, a ramping
profile around the edges
of the mat is
recommended.
Warranty:
10 years for structural
defects in case of
normal use (in
accordance with the
warranty conditions).
Tests:
This mat
meets the standards of
the following tests
carried out by the
University of Gent:
Fire and smoke
tests: B S1
Colourfastness
tests: class 6 or 7
(ISO 105 B02 (1994))
Wronz (wear)
tests: samples
available for
inspection
Moisture
absorption tests:
according to test
report 02-785 A
